Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Booting with 122-33.SRA2.bin

Platform : C6500 + sup 720 + pfc 3A

122-33.SRA2.bin published 2006.12.07

Booting with ll give following diag after : self-decompressing and s72033_sp ..compiled Thu 30-Nov-06 :

Unknown Feature Card WS-F6K-PFC3A ( 201 )

Cannot continue... disabling autobot and resetting.

Is there some system requirements that I

forgot ? or ? SRA1 only ?

Best Regards

Francois

2 REPLIES
Silver

Re: Booting with 122-33.SRA2.bin

Hi Francois

IOS 12.2.33-SRA2 is only supported in 7600 series routers. Catalyst 6500 does not support it.

Hope this helps

Bronze

Re: Booting with 122-33.SRA2.bin

Hello Francois,

Although SRA code is still currently supported on 6500s, this may change in the future.

But with your error, PFC3A is not supported in SRA code:

http://www.cisco.com/en/US/customer/products/hw/routers/ps368/products_installation_guide_chapter09186a008069bb90.html#wp1274096

The section mentions PFC3A as unsupported hardware. This was also unsupported in SRA1 however it appears it was not enforced.

Thanks,

Michael - Cisco TAC

646
Views
0
Helpful
2
Replies
CreatePlease to create content