Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

BOOTLDR did not change after upgrade

I upgrade my Cisco 3750E stack from 12.2(44r)SE5 to 122-55.SE9 but my bootldr stay at 12.2(44r)SE5.  Should I do anything to change this or this the expected output?  This is my output from sh version:

Cisco IOS Software, C3750E Software (C3750E-UNIVERSALK9-M), Version 12.2(55)SE9,       RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Mon 03-Mar-14 22:16 by prod_rel_team
Image text-base: 0x00003000, data-base: 0x02800000

ROM: Bootstrap program is C3750E boot loader
BOOTLDR: C3750E Boot Loader (C3750E-HBOOT-M) Version 12.2(44r)SE5, RELEASE SOFTW      ARE (fc3)

3750ServerStack_2 uptime is 10 hours, 57 minutes
System returned to ROM by power-on
System restarted at 19:56:34 EST Fri May 16 2014
System image file is "flash:c3750e-universalk9-mz.122-55.SE9/c3750e-universalk9-      mz.122-55.SE9.bin"

 

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Gold

There is no need to worry

There is no need to worry about the Bootloader software version.

 

There will be an upgrade when you go from 12.2(58)SE and above.

2 REPLIES
Hall of Fame Super Gold

There is no need to worry

There is no need to worry about the Bootloader software version.

 

There will be an upgrade when you go from 12.2(58)SE and above.

New Member

Thank you very much for your

Thank you very much for your reply Leo.

67
Views
0
Helpful
2
Replies
CreatePlease login to create content