Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Purple

brand new 2851 problem

Got a brand new 2851 and it appears it has a problem when I try to do a write mem I get the following . any way around this or is time to RMA .

*Feb 14 15:13:37.543: %SYS-5-CONFIG_I: Configured from console by console

*Feb 14 15:13:39.463: NV: Invalid Pointer value(45911384) in private configuration structure

*Feb 14 15:13:39.503: NV: Invalid Pointer value(45911384) in private configuration structure

*Feb 14 15:13:39.503: %SYS-4-NV_BLOCK_INITFAIL: Unable to initialize the geometry of nvram

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: brand new 2851 problem

Hi Glen,

Had the same problem with a 3845 the other week.

Try the following

erase /all nvram:

This will erase the NVRAM, Re-Initialise the geometry and reset the pointer unlike the "erase nvram" command.

Hope this helps, if so please rate.

Regards,

Dave

2 REPLIES
Bronze

Re: brand new 2851 problem

Hi Glen,

Had the same problem with a 3845 the other week.

Try the following

erase /all nvram:

This will erase the NVRAM, Re-Initialise the geometry and reset the pointer unlike the "erase nvram" command.

Hope this helps, if so please rate.

Regards,

Dave

Purple

Re: brand new 2851 problem

Dave you are the man , that fixed it . Thats what is great about this forum . Saved me the hassle of RMAing the device . Got to keep that one in the back of mind .

325
Views
0
Helpful
2
Replies
CreatePlease to create content