Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Bridge Cisco 892W Router to another Router

Hi:

I would really appreciate if some cisco gurus can help me on the following:

How can I bridge a Cisco 892W router with a ISP Router, a crappy HuaWei HG256 WHICH HAS TO BE BRIDGED and NOT REPLACED by Cisco 892W as told?

I need as much detail technical information as possible:

interface wlan-ap0 - Built-in wireless AP nodule

Do I need an IP

SSID SSIDNAME

What else?

How about Encryption and authentication? HuaWei is using WPA2-PSK.

How about DHCP? Do I have to DISABLE it in HuaWei?

Of course, if Cisco Wireless is working, I WILL DISABLE WIRELESS in HuaWei.

Gigabit WAN Port on Cisco 892W to be connected to HuaWei.

Do I need an IP? I have configued 1 static IP in the same segment as the HuaWei.

I also configure default-gateway pointing it to HuaWei-192.168.1.1.

Thank. Cisco folks.

SiM

536
Views
0
Helpful
0
Replies