Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

bridge-group input-address-list

I have this query regarding the above command.

 

This is the access-list created

access-list 700 permit c89c.dca0.5539   0000.0000.0000
access-list 700 deny   0000.0000.0000   ffff.ffff.ffff

And applied to the interface

interface FastEthernet0/0.2
 encapsulation dot1Q 2
 ip dhcp relay information trusted
 ip address 192.168.0.1 255.255.255.0
 ip accounting output-packets
 ip nat inside
 ip virtual-reassembly in
 bridge-group 2
 bridge-group 2 input-address-list 700

but then an unknown device is also getting an IP. why is this so?

RTR1#sh run | i 700     
access-list 700 permit 000f.fed9.dee8   0000.0000.0000
access-list 700 permit c89c.dca0.5539   0000.0000.0000
access-list 700 deny   0000.0000.0000   ffff.ffff.ffff

 

2 REPLIES
New Member

bridge-group 2 block-unknown

bridge-group 2 block-unknown-source

New Member

Hi, this is to be applied on

ah. unfortunately this command not available.

c2800nm-adventerprisek9-mz.151-4.M5

134
Views
0
Helpful
2
Replies
CreatePlease to create content