I'm trying to get a GRE-over-IPSec-over-DSL link to bridge NetBEUI, but I can't seem to find a way to do so. I had a suggestion earlier regarding bridge commands, but I can't seem to find them on the boxen (it involved the SSAP and DSAP).
I'm using Cisco 837s and an 831.
I today came across a suggestion to use L2TPv3 instead, if that's the way to go I'll have to reconfigure these routers to do so, but L2TP isn't listed on the product page as a supported protocol.
The Cisco 3845 Integrated Services Router also offers Network Appliance, Inc. the option of using GRE VPN and GRE over IPSec VPN capabilities to back up its core networks. The three main data centers in Hoofddorp, Sunnyvale, and Raleigh are backed up by a VPN through ISP-provided DS3 circuits. Field offices have a direct WAN connection as well as an ISP connection; if the WAN link goes down, traffic can still get out over the ISP link and be routed through the main hub sites.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...