Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Broadcast specific static routes on EIGRP

Hello,

I have EIGRP running on my network with the "redistribute static route" option. Is there a way to filter which static routes are broadcasted over EIGRP as I have some static routes that I don't want to be broadcasted.

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Broadcast specific static routes on EIGRP

You can use the route-map option during redistribution to control which networks will be redistributed into EIGRP. The below example will block 10.10.10.0 and 11.11.11.0 while permitting everything else

ip access-list extended BLOCK_STATIC

permit 10.10.10.0

permit 11.11.11.0

route-map STATIC_ROUTES deny 10

match ip address BLOCK_STATIC

route-map STATIC_ROUTES perm 1000

router eigrp xx

redis static route-map STATIC_ROUTES

HTH,

jerry

1 REPLY
Cisco Employee

Re: Broadcast specific static routes on EIGRP

You can use the route-map option during redistribution to control which networks will be redistributed into EIGRP. The below example will block 10.10.10.0 and 11.11.11.0 while permitting everything else

ip access-list extended BLOCK_STATIC

permit 10.10.10.0

permit 11.11.11.0

route-map STATIC_ROUTES deny 10

match ip address BLOCK_STATIC

route-map STATIC_ROUTES perm 1000

router eigrp xx

redis static route-map STATIC_ROUTES

HTH,

jerry

431
Views
0
Helpful
1
Replies