Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

BVI Interface..

I have a question on a CCIE Lab. Lets's say I have a 4 router setup in a linear fashion

HA------RA<--->RB<--->RC<--->RD-------HB

Let's say HA is in the network range of 10.0.0.0/24 as well as HB. So I configure RA for bridging

and include the FA0/0 intf going to HA and Serial interface going to RB in bridge-group 1. I also setup

the correct BVI. Since I have multiple routers between HA and HB do I need to configure a BVI interface

on each of the intermediate routers or just setup BVI interfaces on RA and RD, and the rest include

bridge-group 1 so the BVI knows what bridge-group it belongs to?

1 REPLY
VIP Super Bronze

BVI Interface..

Never done this, but I think you need to configure the bridge-group xx on all the routers (RA, RB, RC, RD) and add each interface to that group in order for it to work correctly

HTH

444
Views
0
Helpful
1
Replies