Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

C2940-8TT - IOS Upgrade

By mistake I got rid of the IOS file from my switch. I downloaded the version 121-22.EA13 and now I got an error saying DRAM is not sufficient and I can't find a version that will fit.

5 REPLIES

Re: C2940-8TT - IOS Upgrade

Contact TAC to get an older image that will work.

New Member

Re: C2940-8TT - IOS Upgrade

Well, before going to the TAC option, I did copy the latest IOS .bin (the one was giving me the error) by using xmodem and it went good. After it I re-tryied the upgrade using the "archive downlad" command and now it worked.

Don't know why it wanted to do the upgrade before though.

Re: C2940-8TT - IOS Upgrade

Perhaps the previous file was not copied over the switch properly. Not sure what happened. If you still have an issue we can investigate further.

If the problem was that you cant find on our website an image that works for your switch, then TAC would have been of help as that is what I understood from your first post.

Bronze

Re: C2940-8TT - IOS Upgrade

If my memory isn't totally blown away, then I believe that I have seen that the image size is close to what the 2940 can handle in it's DRAM/Flash.

Perhaps your upgrading via XMODEM has deleted some other files which has made enough space for your renewed archive download.

HTH.

New Member

Re: C2940-8TT - IOS Upgrade

It could be...

The good thing is that I was able to do the upgrade after all.

Thank you all for your feedback!

201
Views
0
Helpful
5
Replies
CreatePlease to create content