Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

C2950 crashes while talking to FreeRadius

hi,

i have a problem with switch talking to radius server for 802.1x credentials. basically when it receives accept message from radius with vlan assignment it simply crashes and restarts promptly. has anyone had similiar problems? i use software version 12.1(22)EA8 and freeradius-1.0.1-3.RHEL4.3

there's switch configuration, excerpt from log and radius user config and dictionary file under this link:

http://kuromaku.kondi.net/c2950/

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: C2950 crashes while talking to FreeRadius

It looks like:

CSCse88604

Externally found moderate defect: Resolved (R)

2940 switch reloads with VLAN assign from Radius

Fixed in 12.1(22)EA9 and later. Try to upgrade to this version or a later one preferably.

2 REPLIES
Cisco Employee

Re: C2950 crashes while talking to FreeRadius

It looks like:

CSCse88604

Externally found moderate defect: Resolved (R)

2940 switch reloads with VLAN assign from Radius

Fixed in 12.1(22)EA9 and later. Try to upgrade to this version or a later one preferably.

New Member

Re: C2950 crashes while talking to FreeRadius

thank you. i've upgraded to 12.1(22)EA9 and vlan assignment works just as expected with the following radius attributes:

Tunnel-Medium-Type:1 = IEEE-802

Tunnel-Type:1 = VLAN

Tunnel-Private-Group-Id:1 = 100

132
Views
0
Helpful
2
Replies