Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

C2950T24 dot1x mac-auth-bypass

Hi, I like to know if C2950T24 support MAC Authentication Bypass? I read that 12.1(22)EA9 support for MAC authentication bypass status was added, but I can't configure this in ports. Now we have running 12.1.22-EA13, thanks in advance.

1 REPLY
Hall of Fame Super Silver

Re: C2950T24 dot1x mac-auth-bypass

Hello Federico,

in latest configuration guide for 2950 in dot1x chapter it mentions the guest vlan

>>You can enable optional guest VLAN behavior by using the dot1x guest-vlan supplicant global configuration command.

This example shows how to enable VLAN 9 as an IEEE 802.1x guest VLAN on a port:

Switch(config)# interface fastethernet0/1

Switch(config-if)# dot1x guest-vlan 9

http://www.cisco.com/en/US/docs/switches/lan/catalyst2950/software/release/12.1_22_ea11x/configuration/guide/sw8021x.html#wp1025090

I'm not sure if this what you are looking for

Hope to help

Giuseppe

437
Views
0
Helpful
1
Replies