C2960 Web Catalyst Device Manager switch view shows "Unsupported Device"
I`ve setup many C2960 switches over the years but this one has me stumped.
I`ve configured a brand-new out of the box Cisco C2960+24pc-l using the same procedure used on our other switches but when accessing the Web GUI the view that should show a picture of the switch and port status just shows a grey block with "Unsupported Device".
I`ve tried it from IE, Chrome and firefox and XP plus Win7 PCs to no avail.
Am I missing something or do I need to send this switch back for warranty replacement?
Can anyone point me in the right direction please?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...