Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

C3500XL Switch

When in config mode # and enter vtp ? I get file Configue IFS filesystem for vtp. I do not get the sub-commands for vtp (domain, mode, filesystem, etc)

2 REPLIES

Re: C3500XL Switch

Henry,

The commands for configuring VTP on the 3550XL switches are slightly different than newer switches. You will want to use either command in privileged EXEC mode.

vtp server

vtp transparent

vtp client

http://www.cisco.com/en/US/docs/switches/lan/catalyst2900xl_3500xl/release12.0_5_xu/scg/kivlan.html#wp1035247

HTH,

Mark

Purple

Re: C3500XL Switch

I believe those are so old that that is all handled in the vlan database not in global config.

At the command prompt , not config mode enter\

vlan database, enter

your vtp options are in there.

629
Views
0
Helpful
2
Replies
CreatePlease to create content