Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

c3560-24PS-s Switch with IPBase IOS

Dear Friends,

I have two switches of cisco c3560-24PS-s with IPbase ios installed. I need the routing OSPF and RIPv2 for my network.

But these switches not support OSPF while they can support RIPV2.

Can i upgrade this switch to any IPservices IOS that work ospf for me?

I tried one, it was showing all the thing about ospf: Like

(config)# Router ospf 100 was supporting but it was not working , not making the adjecency.

Please guide me and help me in this regards

Thanks

Ali Khan

4 REPLIES
Hall of Fame Super Gold

c3560-24PS-s Switch with IPBase IOS

Can i upgrade this switch to any IPservices IOS that work ospf for me?

Yes.

New Member

c3560-24PS-s Switch with IPBase IOS

Hi,

Please send the following outputs,(ip base)

sh ver

sh license summary

sh boot

New Member

c3560-24PS-s Switch with IPBase IOS

1) Version= C3560-IPSERVICESK9-M), Version 12.2(55)SE7,

2) show boot

  BOOT path-list      : flash:/c3560-ipservicesk9-mz.122-55.SE7.bin

Config file         : flash:/config.text

Private Config file : flash:/private-config.text

Enable Break        : no

Manual Boot         : no

HELPER path-list    :

Auto upgrade        : yes

Auto upgrade path   :

NVRAM/Config file

      buffer size:   524288

Timeout for Config

          Download:    0 seconds

Config Download

       via DHCP:       disabled (next boot: disabled)

my provider updated it to Ipservices and ospf shows everything but not working

3) Show license summary

  This command is not recognized

Hall of Fame Super Blue

c3560-24PS-s Switch with IPBase IOS

If you switch is running IP Services then it may be your config.

Can you post the OPSF config from the switch and the other switches/routers that are running OSPF ?

What does "sh ip opsf neigh" show ?

Jon

138
Views
0
Helpful
4
Replies
CreatePlease to create content