Are there any significant differences between E and non-E switch products regarding multicast handling ? More specifically, i am interested in hardware-based dropping of non-RPF traffic for example ? Or does only the C6500 provide this ?
The 3750-E is documented as "Unlike the 3750, the 3750-E's TCAM/SRAM is incorporated into the Port ASIC". Further, "SRAM forwarding supports L2, Multicast . . .". I assume this would also be true for 3560 vs. 3560-E.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...