Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

C3750-IPSERVICES-M question

I have a switch with the C3750-IPSERVICES-M image on it. I thought this would allow me to do layer 3 stuff but I can't seem to enable eigrp routing. What image should I use if I need routing capabilities?

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: C3750-IPSERVICES-M question

Roland

IPServices should support full EIGRP. What happens when you configure

3750(config)# router eigrp 1

You have enabled ip routing on the switch ? ie.

3750(config)# ip routing

Jon

3 REPLIES
Hall of Fame Super Blue

Re: C3750-IPSERVICES-M question

Roland

IPServices should support full EIGRP. What happens when you configure

3750(config)# router eigrp 1

You have enabled ip routing on the switch ? ie.

3750(config)# ip routing

Jon

New Member

Re: C3750-IPSERVICES-M question

Crud...I forgot to enable ip routing! Thanks Jon!

Hall of Fame Super Blue

Re: C3750-IPSERVICES-M question

Roland

No problem. If i had 5 points for every time i forgot this sort of thing i'd be up there with Rob :-)

Jon

1160
Views
0
Helpful
3
Replies
CreatePlease to create content