cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1062
Views
19
Helpful
16
Replies

C3750 packets not getting marked

gsidhu
Level 3
Level 3

Hi,

Customer requirement is to:

a) mark traffic from Exchange Server destined for Blackberry Enterprise Server at another site to AF21. The BES server ip address is 10.202.1.76.

b) mark Citrix traffic as CS4.

I've attached part of the configuration. The problem as you will see from the 'sh policy-map int xxxx' output is that none of the traffic is getting marked.

I think the problem is with the access list.

Please could somebody take a look and let me know what I am doing wrong?

The Exchange server is nic teamed (int gi 1/0/1 and int gi 2/0/1).

The Citrix Server is on gig 1/0/4 and gig 2/0/4).

Thanks

16 Replies 16

Yes, if you need to insure nothing slips by. However, if you're certain both Citrix and Exchange packets would only have the markings in your original table, that would work fine too.

Thank you very much for your time on this

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: