Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

C3750 - show Boot

Which image will load on the Cisco 3750 switch.

Server-SW_A#show boot
BOOT path-list      : flash:c3750e-universalk9-mz.122-44.SE.bin
Config file         : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break        : no
Manual Boot         : no
HELPER path-list    :
Auto upgrade        : yes
Auto upgrade path   :
Timeout for Config
          Download:    0 seconds
Config Download
       via DHCP:       disabled (next boot: disabled)
-------------------
Switch 1
-------------------
BOOT path-list      : flash:c3750e-universal-mz.122-44.SE1.bin
Config file         : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break        : no
Manual Boot         : no
HELPER path-list    :

Auto upgrade        : no
Auto upgrade path   :
Server-SW_A#

  • LAN Switching and Routing
2 REPLIES

Re: C3750 - show Boot

Hi,

The following output shows  Cisco 3750 switch stack comprised of two switches if yes then both switches show they are booting from flash:

If you want to change the path use the following command in switches

switch(config)#boot system switch all flash:c3750-ipbasek9-mz.122-37.SE.bin


Hope that helps out your query !!

If helpful do rate the valuable post.

Regards
Ganesh.H
Hall of Fame Super Gold

Re: C3750 - show Boot

12.2(44)SE1

3203
Views
0
Helpful
2
Replies