Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

c3750 unable to boot up after flash upgrade

Hi,

Appreciate help on the following boot up error:

Boot Sector Filesystem (bs) installed, fsid: 3

done.

Loading "flash:c3750-ipbasek9-mz.122-25.SEE2.bin"...flash:c3750-ipbasek9-mz.122-

25.SEE2.bin: no such file or directory

Error loading "flash:c3750-ipbasek9-mz.122-25.SEE2.bin"

Interrupt within 5 seconds to abort boot process.

Boot process failed...

The system is unable to boot automatically. The BOOT

environment variable needs to be set to a bootable

image.

switch:

Could someone advise me the steps or send me the relevant links?

do I need to do a xmodem since the flash:c3750-ipbasek9-mz.122-25.SEE2.bin is not found?

Thanks

Christina

2 REPLIES
Purple

Re: c3750 unable to boot up after flash upgrade

If you do a "dir flash: " does it show any images ? If so then add a boot statement to match image in flash . "boot system flash: .

Silver

Re: c3750 unable to boot up after flash upgrade

Before going for the xmodem option do a dir flash: just as what Grant has suggested. See if you have any bootable images present in your flash. If it is present then do a boot flash:

It should boot up. But if you have no images in your flash, then follow this link for xmodem recovery. http://www.cisco.com/en/US/products/hw/switches/ps628/products_tech_note09186a0080169696.shtml

HTH

Hoogen

1758
Views
7
Helpful
2
Replies
CreatePlease login to create content