C4503 IOS Deleted and how to load a new updated IOS from Tftp
My original intention is to upgrade the C4503 IOS with cat4500-ipbasek9-mz.122-54.SG.bin in the Sup II+ engine. The switch said the space is not enough even after I delete one of the old IOS. By deleting the two old IOS and use Copy tftp flashboot, the switch said the space is still not enough too.
I suspect it has to reload but it is too late becaue all the IOS are gone. So, after reload, the switch only boot to ROMMON.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...