Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k

C4507 Ethernet Module Reset

all,

i've encountered a downtime on one of the ethernet module on my 4500s. after doing a reset using the command hw-module module <number> reset, half of the ports (12/48) were restored. i've opened a TAC case to check on other things. but when i got back to the office today and checked module 5, all ports are now active. can someone explain what could trigger this ethernet modules to go down in the first place? and how long does it take to recover power on all the 48 ports on this module? i've attached the syslog messages and output for show power inline module.

1 REPLY

Re: C4507 Ethernet Module Reset

sorry, i was looking at the wrong L3 switch. half of the ports are still down today (faste5/1 - 24):

Available:3630(w) Used:1725(w) Remaining:1905(w)

Interface Admin Oper Power(Watts) Device Class

From PS To Device

--------- ------ ---------- ---------- ---------- ------------------- -----

Fa5/1 static off 9.0 8.0 n/a n/a

Fa5/2 static off 9.0 8.0 n/a n/a

Fa5/3 static off 9.0 8.0 n/a n/a

Fa5/4 static off 9.0 8.0 n/a n/a

Fa5/5 static off 9.0 8.0 n/a n/a

Fa5/6 static off 9.0 8.0 n/a n/a

Fa5/7 static off 9.0 8.0 n/a n/a

Fa5/8 static off 9.0 8.0 n/a n/a

Fa5/9 static off 9.0 8.0 n/a n/a

Fa5/10 static off 9.0 8.0 n/a n/a

Fa5/11 static off 9.0 8.0 n/a n/a

Fa5/12 static off 9.0 8.0 n/a n/a

Fa5/13 static off 9.0 8.0 n/a n/a

Fa5/14 static off 9.0 8.0 n/a n/a

Fa5/15 static on 9.0 8.0 Ieee PD 2

Fa5/16 static off 9.0 8.0 n/a n/a

Fa5/17 static off 9.0 8.0 n/a n/a

Fa5/18 static off 9.0 8.0 n/a n/a

Fa5/19 static off 9.0 8.0 n/a n/a

Fa5/20 static on 9.0 8.0 Ieee PD 2

Fa5/21 static off 9.0 8.0 n/a n/a

Fa5/22 static off 9.0 8.0 n/a n/a

Fa5/23 static off 9.0 8.0 n/a n/a

Fa5/24 static off 9.0 8.0 n/a n/a

308
Views
0
Helpful
1
Replies
CreatePlease to create content