cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
7761
Views
0
Helpful
9
Replies

%C4K_RKNOVA-4-INVALIDTOKENEXPIRED

Muhammed AKYUZ
Level 1
Level 1

hi,

we are getting this log from Catalyst 4500. What kind of problem should it be?

Dec  6 11:18:57.800: %C4K_RKNOVA-4-INVALIDTOKENEXPIRED: STANDBY:(Suppressed 100 times)Expired token 28389 in the invalid token list (NumEntries: 6) of type IrmPortId other id == 4294967288

9 Replies 9

Somasundaram Jayaraman
Cisco Employee
Cisco Employee

Hi Muhammed,

In most cases this error messages will appear if wccp is configured and it is not supported by the supervisor engine installed.

There are some cosmetic bugs related to this as well.

Could you please post the show version & show module output?

Cheers

Somu

sh ver

Cisco IOS Software, IOS-XE Software, Catalyst 4500 L3 Switch Software (cat4500e-UNIVERSAL-M), Version 03.01.01.SG RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2010 by Cisco Systems, Inc.

Compiled Tue 14-Dec-10 21:30 by prod_rel_team

Cisco IOS-XE software, Copyright (c) 2005-2010 by cisco Systems, Inc.

All rights reserved.  Certain components of Cisco IOS-XE software are

licensed under the GNU General Public License ("GPL") Version 2.0.  The

software code licensed under GPL Version 2.0 is free software that comes

with ABSOLUTELY NO WARRANTY.  You can redistribute and/or modify such

GPL code under the terms of GPL Version 2.0.  For more details, see the

documentation or "License Notice" file accompanying the IOS-XE software,

or the applicable URL provided on the flyer accompanying the IOS-XE

software.

Image text-base: 0x1009E914, data-base: 0x13B71550

ROM: 15.0(1r)SG1

Jawa Revision 7, Snowtrooper Revision 0x0.0x15

4500-NEW uptime is 24 weeks, 19 hours, 21 minutes

Uptime for this control processor is 24 weeks, 16 hours, 4 minutes

System returned to ROM by reload

System restarted at 18:19:42 EEST Tue Jun 21 2011

Running default software

Last reload reason: Reload command

License Information for 'WS-X45-SUP7-E'

    License Level: ipbase   Type: Permanent

    Next reboot license Level: ipbase

cisco WS-C4510R+E (MPC8572) processor (revision 8) with 786516K/16384K bytes of memory.

Processor board ID FOX1513H1HM

MPC8572 CPU at 1.5GHz, Supervisor 7

Last reset from Reload

43 Virtual Ethernet interfaces

102 Gigabit Ethernet interfaces

20 Ten Gigabit Ethernet interfaces

511K bytes of non-volatile configuration memory.

Configuration register is 0x2101

sh module

Chassis Type : WS-C4510R+E

Power consumed by backplane : 40 Watts

Mod Ports Card Type                              Model              Serial No.

---+-----+--------------------------------------+------------------+-----------

1    12  10GE SFP+                              WS-X4712-SFP+E     CAT1511L0DT

2     6  1000BaseX (GBIC)                       WS-X4306-GB        JAE1048G5YV

5     4  Sup 7-E 10GE (SFP+), 1000BaseX (SFP)   WS-X45-SUP7-E      CAT1515L03L

6     4  Sup 7-E 10GE (SFP+), 1000BaseX (SFP)   WS-X45-SUP7-E      CAT1515L00L

9    48  10/100/1000BaseT (RJ45)                WS-X4548-GB-RJ45   JAE1049GJNX

10    48  10/100/1000BaseT (RJ45)                WS-X4548-GB-RJ45   JAE1049GL3W

M MAC addresses                    Hw  Fw           Sw               Status

--+--------------------------------+---+------------+----------------+---------

1 0026.0b79.f246 to 0026.0b79.f251 1.1                               Ok     

2 0016.c75e.ff20 to 0016.c75e.ff25 4.2                               Ok     

5 6400.f1e6.ea00 to 6400.f1e6.ea03 1.0 15.0(1r)SG1  03.01.01.SG      Ok     

6 6400.f1e6.ea04 to 6400.f1e6.ea07 1.0 15.0(1r)SG1  03.01.01.SG      Ok     

9 0012.d972.a5c0 to 0012.d972.a5ef 2.3                               Ok     

10 0012.d972.a410 to 0012.d972.a43f 2.3                               Ok     

Mod  Redundancy role     Operating mode      Redundancy status

----+-------------------+-------------------+----------------------------------

5   Standby Supervisor  SSO                 Standby hot                     

6   Active Supervisor   SSO                 Active                          

System Failures:

----------------

Power Supply:   bad/off (see 'show power')

sh ip wccp

Global WCCP information:

    Router information:

        Router Identifier:                   1.1.1.199

        Protocol Version:                    2.0

    Service Identifier: 61

        Number of Service Group Clients:     1

        Number of Service Group Routers:     2

        Total Packets s/w Redirected:        0

          Process:                           0

          CEF:                               0

        Redirect access-list:                WCCP_LAN_TO_WAN_61

        Total Packets Denied Redirect:       8594844

        Total Packets Unassigned:            0

        Group access-list:                   -none-

        Total Messages Denied to Group:      0

        Total Authentication failures:       0

        Total Bypassed Packets Received:     0

    Service Identifier: 62

        Number of Service Group Clients:     1

        Number of Service Group Routers:     2

        Total Packets s/w Redirected:        0

          Process:                           0

          CEF:                               0

        Redirect access-list:                WCCP_WAN_TO_LAN_62

        Total Packets Denied Redirect:       0

        Total Packets Unassigned:            0

        Group access-list:                   -none-

        Total Messages Denied to Group:      0

        Total Authentication failures:       0

        Total Bypassed Packets Received:     0

I am seeing the same error in the logs of a box I deployed last night.  There is no WCCP configured on this device.  I am running cat4500e-universalk9.SPA.03.03.00.SG.151-1.SG.bin code with redundent Sup 7L-E 10GE (SFP+).

Anyone have another thought on what this could be from.  My install is a very simple L2 access switch.

Thanks

Pat

Brendan Marmont
Level 1
Level 1

Hi, I have the same entry appearing in my logs, did you find a resolution for this topic?

Cheers,

Brendan

Upgrade to cat4500e-universalk9.SPA.03.03.00.SG.151-1.SG.bin has resolved the issue. Indeed i believe it was due to wccp.

I'm running cat4500e-universalk9.SPA.03.03.00.SG.151-1.SG.bin with no WCCP.

The release notes indicate this is a cosmetic issue related to OIR of linecards.

Reboot and it will most likely clear.   I haven't had a chance to reboot and verify yet.

patrickh99,

Did you ever reboot your switch?  Did it clear up the error message?  The reason I ask is this recently appeared on one of my 4507's.  I'm running 03.03.02.SG.151-1.SG2.

Thx,

Tone

I don't have wccp enabled, but still encountering this issue.

Kias
Fonicom Limited
raiseaticket Malta

jacobbriggs
Level 1
Level 1

Same issue here, logs are full of error.

063435: 004230: Oct 27 15:07:51.431 UTC: %C4K_RKNOVA-4-INVALIDTOKENEXPIRED: STANDBY:(Suppressed 100 times)Expired token 3221 in the invalid token list (NumEntries: 6) of type IrmPortId other id == 4294967287
063436: 004231: Oct 27 15:12:54.433 UTC: %C4K_RKNOVA-4-INVALIDTOKENEXPIRED: STANDBY:(Suppressed 100 times)Expired token 3221 in the invalid token list (NumEntries: 6) of type IrmPortId other id == 4294967287
063437: 004232: Oct 27 15:17:57.435 UTC: %C4K_RKNOVA-4-INVALIDTOKENEXPIRED: STANDBY:(Suppressed 100 times)Expired token 3221 in the invalid token list (NumEntries: 6) of type IrmPortId other id == 4294967287
063438: 004233: Oct 27 15:23:00.437 UTC: %C4K_RKNOVA-4-INVALIDTOKENEXPIRED: STANDBY:(Suppressed 100 times)Expired token 3221 in the invalid token list (NumEntries: 6) of type IrmPortId other id == 4294967287

Any definitive root cause discovered here? cat4500e-universalk9.SPA.03.03.02.SG.151-1.SG2.bin

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card