Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

C6509-E and VS-S720-10G visio stencils

Hi there,

I need those two stencils.

I have checked here http://www.cisco.com/en/US/prod/assets/visio/product_visio_icon0900aecd800fd93c.zip but:

- the one for the C6509-E is not there

- the one for the supervisor does not work properly (misaligned anchor points).

Thanks for helping...

7 REPLIES
Bronze

Re: C6509-E and VS-S720-10G visio stencils

You will need Microsoft Visio Standard or Professional in order to see these stencils correctly.

To download the add-ons to enjoy the full functionality of all the Cisco Visio Stencils click this link.

http://www.cisco.com/en/US/products/prod_visio_icon_list.html

New Member

C6509-E and VS-S720-10G visio stencils

Also I am looking for the following stencils:

CEF720 16 port 10GE                    WS-X6816-10GE

CEF720 48 port 10/100/1000mb Ethernet  WS-X6848-GE-TX

The stencils above are very old

New Member

Did you ever find stencil: WS

Did you ever find stencil:

 

WS-X6816-10GE

It's no where to be found

New Member

C6509-E and VS-S720-10G visio stencils

Yes, the glue points for the VS-Sup720-10G are wrong and I can't figure out how to change them.  However, the VS-Sup720-10G-3C(&XL) has the glue points in the correct location.

New Member

C6509-E and VS-S720-10G visio stencils

Hi Greg

I got around the glue points problem by adding my own.

- Andre

New Member

C6509-E and VS-S720-10G visio stencils

Hmm.  I've tried doing that by following the guides online. 

http://office.microsoft.com/en-us/visio-help/add-move-or-delete-connection-points-HP001231166.aspx

That guide says that I shoud be able to add my own, but it won't take them.  Matter of fact, the glue points APPEAR to be in the right location, but they still show up wrong after you go back to the pointer tool.

New Member

C6509-E and VS-S720-10G visio stencils

Hi Greg

Here are some tips:

1. Before selecting the Connector Tool, ensure the SUP-720 object is selected or you will be adding the points to nothing.

2. Try zooming in before adding the points, such as 400% or more.I go in as much as 800%

3. I would recommend using Visio 2013 or Visio 2010 but not earlier.

Hope this was helpful. I would like to hear your feedback on this.

8542
Views
0
Helpful
7
Replies