Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

C7200 IOS does not support CBWFQ

I have a C7200 router which does not support full feature CBWFQ. There are no option to configure following commands:

class-map match-any voice

match protocol rtp

match ip dscp ef

System image file is "slot0:c7200-ds-mz.121-21.bin"

cisco 7206 (NPE200) processor (revision B) with 114688K/16384K bytes of memory.

Processor board ID 7627369

R5000 CPU at 200Mhz, Implementation 35, Rev 2.1, 512KB L2 Cache

6 slot midplane, Version 1.3

X.25 software, Version 3.0.0.

4 Ethernet/IEEE 802.3 interface(s)

6 FastEthernet/IEEE 802.3 interface(s)

16 Serial network interface(s)

125K bytes of non-volatile configuration memory.

4096K bytes of packet SRAM memory.

16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).

4096K bytes of Flash internal SIMM (Sector size 256K).

WHICH IOS WILL SUPPORT ALL CBWFQ Commands & above cards?

Everyone's tags (4)
1 REPLY
VIP Super Bronze

C7200 IOS does not support CBWFQ

Looking at the feature navigator, there are several images that support CBWFQ.  Here is one:

c7200-adventerprisek9-mz.124-24.T7.bin

Also, here is the link:

http://www.cisco.com/cisco/software/release.html?mdfid=268437991&softwareid=280805680&release=15.1.3S2&os=

HTH

308
Views
0
Helpful
1
Replies
CreatePlease login to create content