Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

C7613 - Interface Receive Discards

Hi !

During maintenance tasks I found lots of "Interface Receive Discards".

Vlanx is up, line protocol is up

Hardware is EtherSVI, address is 000e.d693.1800 (bia 000e.d693.1800)

Internet address xxx.xxx.xxx.xxx/24

MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation ARPA, loopback not set

Keepalive not supported

ARP type: ARPA, ARP Timeout 04:00:00

Last input 00:00:00, output 00:00:00, output hang never

Last clearing of "show interface" counters 1w0d

Input queue: 0/75/2843154/504583 (size/max/drops/flushes); Total output drops: 0

Queueing strategy: fifo

Output queue: 0/40 (size/max)

5 minute input rate 3177000 bits/sec, 479 packets/sec

5 minute output rate 1224000 bits/sec, 695 packets/sec

L2 Switched: ucast: 26986224264 pkt, 17469031992475 bytes - mcast: 3792030 pkt, 458932190 bytes

L3 in Switched: ucast: 147937708 pkt, 110819953291 bytes - mcast: 0 pkt, 0 bytes mcast

L3 out Switched: ucast: 271583087 pkt, 63055255595 bytes mcast: 0 pkt, 0 bytes

152670256 packets input, 111325413848 bytes, 0 no buffer

Received 3792022 broadcasts (21923 IP multicasts)

0 runts, 0 giants, 18386 throttles

0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

272108712 packets output, 62146818023 bytes, 0 underruns

0 output errors, 0 interface resets

0 output buffer failures, 0 output buffers swapped out

Most of the traffic is L2 switched - only approx. 2-4Mbit/s are routed.

Do you have any idea why these Discards are happening ?

Is there a chance to find out why they are happening ? and which packets are dropped ?

I would appreciate any help...

Thx

Hans

203
Views
0
Helpful
0
Replies
CreatePlease to create content