Unambiguous answer, what PS you need is not... All depends on the continued growth...
Based on your current configuration, the minimum PS in redundant mode is 1000W, but you have one empty slot for further growth and if you need in future the PoE 1000W PS not suitable (1000W and 1400W AC data-only PS). Perhaps a choice of power supplies whis support PoE will be more preferable - 1300W, 2800W or 4200W.
Also keep in mind that 2800W PS has 1400W for data and 1400W for PoE, 1300W and 4200W PS do not allocate a fixed amount of power for data and PoE
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...