here's my challenge: i have a few hundred clients who need to connect to a server via its ip address (cannot use hostname/DNS). problem is, there is a design for a new datacenter that calls for the server's ip tp be changed to something different.
the topology: the clients all connect to 2950s (each 2950 is its own vlan) and then each 2950 uplinks to a single 3750. the 3750 has an SVI for each vlan (used as the gateway ip for each client.) the server is located on the other side of the 3750 on its own 2950/vlan as well.
is there someway that i can use NAT or something like port forwarding on the 3750 SVIs to take all traffic destined for the old server ip and send it to the new server ip instead (being transparent to the clients)?
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...