Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Can I use a WS-X6148A-GE-TX in a 6509E chassis with a 720-3BXL

If so, do I need to do anything special ?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: Can I use a WS-X6148A-GE-TX in a 6509E chassis with a 720-3B

Hi Friend,

Yes you can run this card in 6509E chassis with 720-3BXL.

If you are running CATOS you need minimum 8.4(1) and if you are running Native IOS you need minimum 12.2(18)SXF

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/ol_4164.htm

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/ol_4498.htm

HTH

Ankur

*Pls rate all helpfull post

2 REPLIES
Cisco Employee

Re: Can I use a WS-X6148A-GE-TX in a 6509E chassis with a 720-3B

Hi Friend,

Yes you can run this card in 6509E chassis with 720-3BXL.

If you are running CATOS you need minimum 8.4(1) and if you are running Native IOS you need minimum 12.2(18)SXF

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/ol_4164.htm

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/ol_4498.htm

HTH

Ankur

*Pls rate all helpfull post

New Member

Re: Can I use a WS-X6148A-GE-TX in a 6509E chassis with a 720-3B

Thanks, Current ship on 720 was 12.2(17d)SXB11

204
Views
0
Helpful
2
Replies
CreatePlease login to create content