Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Can I use Catalyst 6504E slot2 for ethernet module or service module?

I am thinking composition of catalyst6504E.

can I use slot2 of catalyst6504E for ethernet module or service module?

cisco configuration tool answer OK.

But cisco power calclator point out me.

configuration tool

     WS-C6504-E
     Catalyst 6500 Enhanced 4-slot chassis,5RU,no PS,no Fan Tray
1
      S733AEK9-12233SXI
      Cisco CAT6000-SUP720 IOS ADVANCED ENTERPRISE SERVICES SSH
1
      WS-SUP720-3B
      Catalyst 6500/Cisco 7600 Supervisor 720 Fabric MSFC3 PFC3B
1
      CF-ADAPTER-SP
      SP adapter for SUP720 and SUP720-10G
1
      WS-SVC-FWM-1-K9
      Firewall blade for 6500 and 7600, VFW License Separate
1
      WS-X6748-GE-TX
      Cat6500 48-port 10/100/1000 GE Mod: fabric enabled, RJ-45
1
      WS-X6724-SFP
      Catalyst 6500 24-port GigE Mod: fabric-enabled (Req. SFPs)
1
      FAN-MOD-4HS
      High-Speed Fan Module for 7604/6504-E
1
      PWR-2700-AC/4
      2700W AC Power Supply for Cisco 7604/6504-E
2
      CAB-7513AC
      AC POWER CORD NORTH AMERICA (110V)
2

cisco power calclator

SlotLine CardOutput Current(@42V)
(A)
Output Power
(W)
Typical Power Used
(W)
Heat Dissipation
(BTU/Hr)
FAN2FAN-MOD-4HS1.4360.0648.05241.30
1WS-SUP720-3B6.72282.24225.791133.94
2WS-SVC-FWM-16.72282.24225.791133.94
3WS-X6724-SFP4.93207.06165.65831.89
4WS-X6148A-GE-TX2.50105.0084.00421.85
Output Current(@42V)
(A)
Output Power
(W)
Typical Power Used
(W)
Heat Dissipation
(BTU/Hr)
Total22.30936.60749.283762.93

Slot 2 is redundant supervisor-engine slot. It will allocate either the power of a supervisor engine or of the line card, whichever is greater. The Actual Output Current, Out Power and Heat Dissipation for your selected line card are 4.09A,171.78W,and 690.15 BTU/Hr

2 ACCEPTED SOLUTIONS

Accepted Solutions

Re: Can I use Catalyst 6504E slot2 for ethernet module or servic

According to the table above and as Jon stated yes you can.

Francisco

Hall of Fame Super Blue

Re: Can I use Catalyst 6504E slot2 for ethernet module or servic

As pointed out by Francisco you can use redudant slot for any module you like.

Jon

6 REPLIES
Hall of Fame Super Blue

Re: Can I use Catalyst 6504E slot2 for ethernet module or servic

Not sure what you are asking. Both your outputs show that you can indeed use slot 2 for any module you want.

Perhaps you could clarify.

Jon

New Member

Re: Can I use Catalyst 6504E slot2 for ethernet module or servic

thanks, Jon.

sorry, I just saw "Slot 2 is redundant supervisor-engine slot. "

and my colleague say it's impossible.

so I asked.

did anyone use that composition?

Re: Can I use Catalyst 6504E slot2 for ethernet module or servic

Chassis

Supervisor Engine 32/ Supervisor Engine 720 Slots

Classic Line-Card Slots

Single Fabric Connected Line Cards

Dual Fabric Connected Line Cards

Cisco Catalyst 6503

1 and 2

2 and 3

2 and 3

WS-X67XX line cards not supported

Cisco Catalyst 6503-E

1 and 2

2 and 3

2 and 3

2 and 3

Cisco Catalyst 6504-E

1 and 2

2 thru 4

2 thru 4

2 thru 4

Cisco Catalyst 6506

5 and 6

1 through 6

1 through 6

1 through 6

Cisco Catalyst 6506-E

5 and 6

1 through 6

1 through 6

1 through 6

Cisco Catalyst 6509

5 and 6

1 through 9

1 through 9

1 through 9

Cisco Catalyst 6509-E

5 and 6

1 through 9

1 through 9

1 through 9

Cisco Catalyst 6509-NEB

5 and 6

1 through 9

1 through 9

1 through 9

Cisco Catalyst 6509-NEB-A

5 and 6

1 through 9

1 through 9

1 through 9

Cisco Catalyst 6513

7 and 8

1 through 13

1 through 13

9 through 13

Re: Can I use Catalyst 6504E slot2 for ethernet module or servic

According to the table above and as Jon stated yes you can.

Francisco

Hall of Fame Super Blue

Re: Can I use Catalyst 6504E slot2 for ethernet module or servic

As pointed out by Francisco you can use redudant slot for any module you like.

Jon

New Member

Re: Can I use Catalyst 6504E slot2 for ethernet module or servic

thank you all.

I agree with you.

659
Views
0
Helpful
6
Replies