Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Can not plug the WS-X4606-X2-E to cisco WS-C4506-E

Dear all!

yesterday I tried to plug the WS-X4606-X2-E module to WS-C4506-E

but when I show module, the switch can not recognize new module

SW4506_1#show module

Chassis Type : WS-C4506-E

Power consumed by backplane : 0 Watts

Mod Ports Card Type                              Model              Serial No.

---+-----+--------------------------------------+------------------+-----------

1   

2    

3   

6     0  Unsupported module                     WS-X4606-X2-E  

My IOS is:

bootflash:cat4500-entservicesk9-mz.122-44.SG.bin

I read in this link:

http://www.cisco.com/en/US/prod/collateral/modules/ps2710/ps5494/product_data_sheet0900aecd802109ea.html

and my switch is full support this module...

what must I do now?

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Can not plug the WS-X4606-X2-E to cisco WS-C4506-E

HI ,

You have Sup 5 were in this module is not supported.

This module is supported from Sup6-E, Supervisor Engine 6L-E, and the Supervisor Engine 7-E.

HTH

Regards

Inayath

***

Please rate useful posts and remember to mark any solved questions as answered. Thank you.

4 REPLIES
Cisco Employee

Can not plug the WS-X4606-X2-E to cisco WS-C4506-E

Phi,

Could you please check the requirement(Sup) and if this all there let me know:

WS-X4606-X2-E

Supported on by the Supervisor Engine 6-E, Supervisor Engine 6L-E, and the Supervisor Engine 7-E

Supported only in the Catalyst 4503-E, Catalyst 4506-E, Catalyst 4507R+E, and Catalyst 4510R+E switch chassis.

Can be installed in any non-supervisor engine slot.

Catalyst 4503—6/12 (X2), 12/24 (SFP)

Catalyst 4506-E, Catalyst 4507R+E—6/30 (X2), 12/60 (SFP)

Catalyst 4510R+E—6/30 (X2), 12/60 (SFP)

HTH

REgards

Inayath

New Member

Can not plug the WS-X4606-X2-E to cisco WS-C4506-E

this is my current Sup:

Mod Ports Card Type                              Model              Serial No.

---+-----+--------------------------------------+------------------+-----------

1     2  Supervisor V 1000BaseX (GBIC)          WS-X4516         

Is it not support for WS-X4606-X2-E :| ???

Cisco Employee

Can not plug the WS-X4606-X2-E to cisco WS-C4506-E

HI ,

You have Sup 5 were in this module is not supported.

This module is supported from Sup6-E, Supervisor Engine 6L-E, and the Supervisor Engine 7-E.

HTH

Regards

Inayath

***

Please rate useful posts and remember to mark any solved questions as answered. Thank you.

New Member

Can not plug the WS-X4606-X2-E to cisco WS-C4506-E

Thanks for your support!

rgds!

266
Views
0
Helpful
4
Replies