Unfortunetlly during a power outage (the backup battery failed), one of our Catalyst 3500 Series XL switch (WS-C3524-XL-EN) got damaged... If you turn it on, the fans turn on and the RPS and ports 3-7-11-15-18-23 turn on Amber and it stays that way, on the console we get nothing but garbage. Can this swtich be saved? I'm already expecting a "it's as good as dead" reply, but if there's any chance, Please let me know. Thank you All in advanced for your advice. -Gabriel C.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...