I can ping from Server 1 on Subnet A, across the WAN, to Server 2 on Subnet B with no problems. Full response, no lost packets. But when I try to ping Server 2 on Subnet B from Server 3 on Subnet B, I get a reply on the first packet, then the rest time out.
At first I thought it was a Server 2008 thing, but I have the same issue trying to reach my Server 2003 box. I have replaced the switch, but I'm getting the same errors.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...