Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Can't console to ME3600X

Hello,

we have a new one Cisco ME 3600X series,

problem in console, some unknown symbols on the screen,

telnet is ok,

I tried to change everything is possible in line con 0, but nothing happens.

Tried to set all types of speed, baudrate, stopbits, parity.

Other ME3600X works fine.

Is it means that console port is dead?

  • LAN Switching and Routing
Everyone's tags (1)
1 REPLY
Cisco Employee

Can't console to ME3600X

yerzhan,

If you have configured the settings to be:

Step 4

Configure the baud rate and character format of the PC or terminal to match these console port default characteristics.

9600 baud

8 data bits

1 stop bit

No parity

None (flow control)

And have made sure that the console cable is working fine and no issues with that then go ahead and get the rma for this box.

HTH

Regards

Inayath

**Plz rate all usefull posts.

283
Views
0
Helpful
1
Replies
This widget could not be displayed.