Can't ping HSRP from Nexus Device

[Matthieu DURIEUX]

Dear All,

I don't know why but I can't ping the HSRP address 10.xx.xx.1 from BIO-N5K-22 and LIMS on the right side (see diagram in attachment). All other device are correct (ping ok)

VLAN 200

N5K-11: 10.xxx.xxx.2 (HSRP listen)

N5K-12: 10.xxx.xxx.3 (HSRP master 10.x.x.1)

N5K-21: 10.xxx.xxx.4 (HSRP bck)

N5K-22: 10.xxx.xxx.5 (HSRP Listen)

LIMS (Catalyst 3750x in level 2)

The network is in dual-homed with 2 peer-link (& keep-alive)between each device in the same room (11<-->12 and 21 <-->22). I checked all level 2 (vlan, interconnection, ....). I used the fabricpath mode for my vlans. I'm wondering if there is a problem with my configuration from my nexus. 

Could you tell me if you have any idea ? I can give you more information if needed.

Thanks for your help.

[ranraju]

hi m.durieux,

Can you share the following outputs from all the switches. You can attach the files separately for each device.

1. show run int vlan 200

2. show mac address-table vlan 200

3. show spanning-tree vlan 200

Regards,

Ranganath

[Matthieu DURIEUX]

Hi Ranraju,

Here's you find attached my files with outputs. Actually, I'm using the vlan 568 for your information.

Thanks for your help.