Can't ping windows servers in different VLANs through SG 200-50 switch
Last week I installed a new router (2911) in my network.
We had to create two different VLANs for the new setup to work as wanted.
I have a Windows 2008 R2 which is a Domain Controller for Active Directory on the ip address 192.168.0.195.
That server (HP DL180 G6) has two NICs. One has the above IP address and the other one has 192.168.0.199.
On the other VLAN, I have a server, running the same OS, that I want to re-join, as it formerly was, the AD on the first server (192.168.0.195). This server has the new IP address 192.168.10.194.
All these are connected to a Cisco switch SG 200-50 Gigabit Smart Switch. That one is connected to a Cisco 2911 router.
The problem is that, once the old 192.168.0.194 got to be 192.168.10.194, the 192.168.0.195 can't ping it anymore... At least not all the time... Sometime it works, sometimes not... Neither can't the 10.194 ping the 0.195 all the time. When one way works the other one doesn't... When one pings the other one successfully, the other one can't...
Please let me know if I was clear enough.
The Cisco engineer that assisted me with the new router said the problem might be with the Cisco switch not being in full duplex...
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.