Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Can't save nvram on catalyst c2950

hi,  I have to make changes on some catalyst c2950 but when I want to save conf, I have this message?  #write Building configuration...  % Warning: Saving this config to nvram may corrupt any network management or security files stored at the end of nvram. Continue? [no]: Of course I enter NO  #sh flash: Directory of flash:/      2  -rwx         109  Mar 01 1993 01:01:41 +01:00  info     3  -rwx         273  Jan 01 1970 01:01:27 +01:00  env_vars     4  -rwx       10512  May 10 2010 14:07:06 +02:00  config.text     5  -rwx          25  May 10 2010 14:07:06 +02:00  private-config.text     6  -rwx     3097872  Mar 01 1993 01:03:54 +01:00  c2950-i6q4l2-mz.121-22.EA4.bin     7  -rwx         744  Mar 01 1993 01:00:23 +01:00  vlan.dat     8  drwx        4032  Mar 01 1993 01:04:38 +01:00  html   362  -rwx         109  Mar 01 1993 01:05:13 +01:00  info.ver   363  -rwx        1048  May 10 2010 14:07:07 +02:00  multiple-fs  7741440 bytes total (3067904 bytes free)  What could I do for saving nvram for sure ?? thanx

3 REPLIES
New Member

Re: Can't save nvram on catalyst c2950

hi,

I have to make changes to nvram on c2950,

but I can't save without this message  , see attached

how could I do

thanx

New Member

Re: Can't save nvram on catalyst c2950

Hi,

This message will be displayed, when it saves after upgrading IOS.

Usually, a problem is the display which is not.

New Member

Re: Can't save nvram on catalyst c2950

ok,

but I didn't make an upgrade on it .

405
Views
0
Helpful
3
Replies