We are trying to convert a sup2/msfc2 from hybrid to native. However, we are getting trouble trying to format the 64mb card which we need because it's big enough to hold the ios. I'm pretty sure this flash was formatted on a native ios. Note that we are able to format and view a 24mb flash.
This is what we have:
Console> (enable) show version
WS-C6509 Software, Version NmpSW: 8.5(1)
Copyright (c) 1995-2005 by Cisco Systems
NMP S/W compiled on Oct 22 2005, 11:11:35
System Bootstrap Version: 7.1(1)
System Boot Image File is 'bootflash:cat6000-sup2k8.8-5-1.bin'
System Configuration register is 0x2102
Hardware Version: 2.0 Model: WS-C6509 Serial #: SCA045101QH
Maybe if we can find a native IOS that's less then 24 mb so we can use that to convert from hybrid to native. After that, we can then possibly format the 64mb card and upgrade the IOS? Does anyone know the smallest native IOS we can use?
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...