cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
534
Views
0
Helpful
1
Replies

Can we upgrade a WS-SUP720-3B module or a WS-SUP720-BASE module?

astanislaus
Level 2
Level 2

Can we upgrade a WS-SUP720-3B module or a WS-SUP720-BASE module by adding memory to a WS_SUP720-3BXL module so that we get 1 GB memory or do we have to replace the whoe module. If upgarde is allowed / possible / supported then do we have to add memory on the switch processor and as well as on the MSFC3 or just the MSFC3 only if we are running IOS.

1 Reply 1

nambi_gct
Level 1
Level 1

3B and 3BXL differ in hardware table capacity.Hence you need to replace the DFC card of your LC.When you have more hardware capacity you also should have DRAM capacity so that software can store the information.[Eg : say 250k route entries].So it is recommended to upgrade both SP and RP memory to as per the recommendation that comes with your IOS software guide.I guess the min req will be 512M.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco