Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Cannot browse internet

Hi,

I configured a cisco 3560g switch with interVlan.

after configuring i can ping to internet, but cannot browse.

Please help me with this..... very very urgent.....

Thank you.

5 REPLIES

Re: Cannot browse internet

If you can ping, but not browse, that sounds like a dns issue. Do you have dns settings on your workstation, and can you ping that dns server?

John

HTH, John *** Please rate all useful posts ***

Re: Cannot browse internet

Hi mohammad,

There could be many reasons Please check below

> Do you able to resolve IP website name when you ping from switch..like if you ping google.com due you see it resolved to ip address

    If no: Problem could be with DNS server. Please verify what DNS server configured...you can try global one 4.2.2.2

            check for below commands:

            ip domain-lookup

            ip name-server

    If Yes:  Try to ping website for below value

               Like: ping -f -l 1472 " if it is working then chenge tcp mss value on interface with command ip tcp adjust-mss 1472

               If it is not working you can lower the value to 1452 or below and adjust mss accordingly

           

Hope this is helpful

Regards

Mahesh

Re: Cannot browse internet

Hi,

I configured a cisco 3560g switch with interVlan.

after configuring i can ping to internet, but cannot browse.

Please help me with this..... very very urgent.....

Thank you.


Hi,

If you are able to ping the internet that means you can ping any public dns server just check any firewall devices is placed between your lan and inetrnet which should allow DNS query to internet also.

Hope to Help !!

Ganesh.H

New Member

Re: Cannot browse internet

Yes, there is a firewall between switch and internet.

I am running ipcop as my firewall.

i am stuck with this issue.

New Member

Re: Cannot browse internet

Thanks guys,

I solved the problem. Its a error in my proxy config.

541
Views
0
Helpful
5
Replies
CreatePlease to create content