Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Cannot Ping A Cisco 2960 Switch

Hi

I have a Cisco 2960 switch which is connected to a Cisco 3560 switch. I am able to ping the 3560 but not the 2960. The 2960 is working fine and so are all the devices and PC's connected to it.

I have attached the configs of both the switches. Hope someone can help me out. Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
VIP Super Bronze

Re: Cannot Ping A Cisco 2960 Switch

Hi Avneet,

Looking at your config below vlan1 is shutdown.  Do a "no sh" under vlan1 and test again.

interface Vlan1
ip address 10.1.2.11 255.255.0.0
no ip route-cache
shutdown

HTH

Reza

4 REPLIES
VIP Super Bronze

Re: Cannot Ping A Cisco 2960 Switch

Hi Avneet,

Looking at your config below vlan1 is shutdown.  Do a "no sh" under vlan1 and test again.

interface Vlan1
ip address 10.1.2.11 255.255.0.0
no ip route-cache
shutdown

HTH

Reza

New Member

Re: Cannot Ping A Cisco 2960 Switch

Thanks mate. That worked

VIP Super Bronze

Re: Cannot Ping A Cisco 2960 Switch

Glad to help

Thanks for the rating

New Member

A big help to resolve an

A big help to resolve an annoying little problem!

Cheers

7539
Views
10
Helpful
4
Replies
CreatePlease to create content