Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cannot ping subnet 192.168.2.1

OK, is it just me, or can you not ping a 192.168 address when creating vlans for it?

For example I created 3 vlans with the config below and can ping each one from my data network 10.20.60.0

int gig0/1.10

encapsulation dot1q 10

ip address 10.20.60.1/23

int gig0/1.20

encapsulation dot1q 20

ip address 10.20.20.1/23

int gig0/130

encapsulation dot1q 30

ip address 172.20.30.1/23

CANNOT PING

int gig0/1.40

encapsulation dot1q 40

ip address 192.168.40.1/24

Is there something wrong that I am not seeing.. Also the 192.168.40.0 is my voice net

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
New Member

Cannot ping subnet 192.168.2.1

Are you able to ping the vlan from switch

Check with your gateway address in data vlan.

Usally data vlan gateway will be firewall, so you are packet getting dropped.

try to put the Core Switch ip in the  gateway address,you will be able to ping.

3 REPLIES
New Member

Cannot ping subnet 192.168.2.1

I ok I think I know whats gonig on.. Working it out.... There is more to my configs than what you see here.

New Member

Cannot ping subnet 192.168.2.1

Are you able to ping the vlan from switch

Check with your gateway address in data vlan.

Usally data vlan gateway will be firewall, so you are packet getting dropped.

try to put the Core Switch ip in the  gateway address,you will be able to ping.

New Member

Cannot ping subnet 192.168.2.1

Please post yout topology and all running-configs.

You might blocking vlan40 in trunk, you might not have vlan40 created on all devices.

939
Views
0
Helpful
3
Replies
CreatePlease to create content