Cannot see Running config

[ericdegboevi]

Dear All,

I have a cisco 2800 router configured and working perfectly.

Nowadays if fails passing internet traffic and i realised that when i display the runing config it does not show anything. When i dispay the startup config i could see the config.

Everything becomes normal when i restart the router.

Can you help identify the problem?

[jimmysands73_2]

Probably the conf reg is set to 0x0040.

http://www.cisco.com/en/US/docs/routers/access/1800/1841/software/configuration/guide/b_creg.html

This article describes and also give a resolution to your issue.

Good luck.

[ericdegboevi]

i have checked the reg config and it is 0x2102.