I have a cisco MSFC with vlan201 (10.5.50.7) & vlan202 10.100.5.1. When I telnet from the switch to an ip
10.1.1.200 135 /source vlan 202 everything works fine. When I change the vlan to 201 and keep the rest of the command the same it doesn't want to connect. All other ports for vlan 201 (like 389, 25 etc) works perfect.
I have enabled tcp debugging on the switch and found the following response as soon as I try and telnet to 10.1.1.200 135
Aug 3 08:12:55: tcp1: O CLOSED 10.1.1.200:135 10.5.50.7:64513 seq 543128771
OPTS 4 SYN WIN 4128
Aug 3 08:12:55: TCP1: state was CLOSED -> SYNSENT [64513 -> 10.1.1.200(135)]
Does this mean the router is closing the session or the server(10.1.1.200)?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.