Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

CAP_FEATURE_HW_MCAST_LIMIT_TRIDENT_PLUS

I have a new N5K switch, and I want to downgrade the NXOS from 5.2(1)N1(1b) to  5.0.3.N2.1 , and go the following incompatibility information:

Note - this is a test switch without any configuration on it. Im downgrading it to test upgrade procedures for an upcoming project.

N5K-TEST1(config)# show incompatibility system bootflash:n5000-uk9.5.0.3.N2.1.bin

The following configurations on active are incompatible with  the system image

1) Service : ipfib , Capability : CAP_FEATURE_HW_MCAST_LIMIT_TRIDENT_PLUS

Description : 'hardware profile multicast max-limit' is configured above 4k

Capability requirement : STRICT

Disable command : Please remove this CLI and try again

N5K-TEST1(config)# no hardware profile multicast max-limit

Device Name:[0x3FF] Instance:[63] Error Type:[(null)] code:[255]

N5K-TEST1(config)# hardware profile multicast max-limit 1000

Device Name:[0x3FF] Instance:[63] Error Type:[(null)] code:[255]

Has anyone seen this error before ? how do i downgrade this switch ?

Regards

Raj

Everyone's tags (2)
1 REPLY

CAP_FEATURE_HW_MCAST_LIMIT_TRIDENT_PLUS

This is solved.. I removed the layer 3 module, it didnt work.. then gave it a restart.. it looks fine now..

N5K-TEST1# show incompatibility system bootflash:n5000-uk9.5.0.3.N2.1.bin

No incompatible configurations

Thanks all..

179
Views
0
Helpful
1
Replies
CreatePlease login to create content