We currently have a very small basic wireless network setup and we are looking to extend access to our connectivity to guests.
We are currently using a pair of AP1142N access points connected back into a Cisco 6509 w/ Sup 720. The access points are not lightweight access points as the small number of access points we are managing did not warrant the need for centralized configuration.
We happen to have an unused Cisco 2811 router lying around and found a used NM-AIR-WLC6 on Ebay that appears to be the most inexpensive wireless controller that I can find. Will this support a captive portal?
Is there a way to implement a captive portal without a wireless lan controller? Are there devices that can placed into our network that would provide captive portal services to both wireless and specified wired switchports (or inline to an entire switch of wired ports)?
Any assistance would be appreciated...
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...