Cat 3550 EMI stop responding after delete vlan.dat
In an attempt to erase the entire content of my 3550 EMI , i executed the command "delete vlan.dat" and reloaded. Disappointedly the switch reloaded back and stop at the following stage as indicated by this output.
Compiled Fri 24-Aug-07 02:15 by myl
00:00:54: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF 00:00:54: %CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF 00:00:55: %LINK-5-CHANGED: Interface Vlan1, changed state to administratively down
Even pressing enter at this junction does not respond any longer.
Please help me urgent as the is stopping me from further lab work.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...