Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cat 3750E IOS upgrade

Hey guys/gals,

I have 3750E 48 TD-S that i'm trying to upgrade the IOS on to a version that supports OSPF. Current version is 12.2.35 SE5 and apparently it doesnt support OSPF. I downloaded 12.2.44 SE5, Universal, and apparently it doesnt support OSPF either.

I'm trying to nail down which version does support OSPF...

Any help would be appreciated.

Bruce

3 REPLIES

Re: Cat 3750E IOS upgrade

Hi

I think u need to go for the enhanced image in that train.

Thanks

Mahmood

Re: Cat 3750E IOS upgrade

Are you enabling the ip routing first? By default, the switch is in Layer 2 switching mode and IP routing is disabled. To use the Layer 3 capabilities of the switch, you must enable IP routing.

Re: Cat 3750E IOS upgrade

Ok, here is the scoop, the 3750-E have 2 possible images files called "Universal", it comes with and w/o crypto support. The features usch as IP Routing are key activated, the feature are there but you need to get the key to active the feature, which sounds like it needs to be purchased:

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750e_3560e/software/release/12.2_46_se/configuration/note/swactivn.html')">http://www.cisco.com/en/US/docs/switches/lan/catalyst3750e_3560e/software/release/12.2_46_se/configuration/note/swactivn.html

384
Views
5
Helpful
3
Replies