Hallo to everyone!
I have problem with optical link between core and WAN segments.
Here is situation:
I use Catalyst 3750E(ver c3750e-universal-mz.122-52.SE) as core switch and Catalyst 6504E(ver adventerprisek9_wan-vz.122-33.SXI6) as WAN switch. After changing optical transceiver from sfp 1000BaseLH to X2 10G 10Gbase-ER in syslog I found this:
%SFF8472-5-THRESHOLD_VIOLATION: Te2/0/2: Voltage low alarm; Operating value: 0.00 V, Threshold value: 2.96 V.
%SFF8472-5-THRESHOLD_VIOLATION: Te2/0/2: Rx power high warning; Operating value: 1.0 dBm, Threshold value: 0.5 dBm.
This message appears every 10 minutes… Physical layer is checked(and SFP on this link worked perfectly). I already changed IOS on c3750e-universalk9-mz.150-1.SE3.bin(CSCts58073 Bug Details
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCts58073
), but problem still appearing.
Here is transceiver detail:
High Alarm High Warn Low Warn Low Alarm
Temperature Threshold Threshold Threshold Threshold
Port (Celsius) (Celsius) (Celsius) (Celsius) (Celsius)
--------- ------------------ ---------- --------- --------- ---------
Te2/0/2 36.6 74.0 70.0 0.0 -4.0
High Alarm High Warn Low Warn Low Alarm
Voltage Threshold Threshold Threshold Threshold
Port (Volts) (Volts) (Volts) (Volts) (Volts)
--------- --------------- ---------- --------- --------- ---------
Te2/0/2 0.00 3.63 3.46 3.13 2.96
Optical High Alarm High Warn Low Warn Low Alarm
Transmit Power Threshold Threshold Threshold Threshold
Port (dBm) (dBm) (dBm) (dBm) (dBm)
--------- ----------------- ---------- --------- --------- ---------
Te2/0/2 -1.9 4.5 0.5 -8.2 -12.2
Optical High Alarm High Warn Low Warn Low Alarm
Receive Power Threshold Threshold Threshold Threshold
Port (dBm) (dBm) (dBm) (dBm) (dBm)
------- ----------------- ---------- --------- --------- ---------
Te2/0/2 1.0 + 4.5 0.5 -14.1 -18.4
Please, could you help me to understand what is wrong with this config…
Best regards.
