Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Cat 4003 Fast Etherchannel question

I have a cat 4003 running catOS. Im looking at the guidelines for Fast Etherchannel based on this document:

http://www.cisco.com/en/US/docs/switches/lan/catalyst5000/catos/4.5/configuration/guide/channel.html#wp17964

We want to do Fast Etherchannel between 2 blades for redundancy. Based on the "valid" configs- where the first 2 channels of a group must be used, do you have to have 2 on 1 blade, 2 on the other for it to be valid (meaning 4 ports on the other device)? Or can this be done with 1 port on 1 module and 1 on the other?

Thanks

Greg

1 REPLY
Silver

Re: Cat 4003 Fast Etherchannel question

You can do with 1 port on 1 module and 1 on the other, but misconfiguration cause in the inability to create an EtherChannel bundle.

Configuring Fast EtherChannel and Gigabit EtherChannel

http://www.cisco.com/en/US/docs/switches/lan/catalyst4000/7.1/configuration/guide/channel.html

113
Views
0
Helpful
1
Replies