Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CAT 4500 and software package

Hello,

How many SVI (Switched Virtual Interfaces) it's possible to configure on Supervisor 6-E and 6L-E with LAN Base software?
Please confirm me with a link to the appropriate site on cisco.com. Feature navigator do not show this information.

Kamil

5 REPLIES
Cisco Employee

Re: CAT 4500 and software package

Why you need more than one SVI on a LAN Based image? SVI is L3 interface for inter-VLAN routing.

BTW, the follow link clearly said SUP 6L-E supports 2048 SVI's and SUP 6-E supports 4096 SVI's.

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/data_sheet_c78-530856.html

http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps9294/product_data_sheet0900aecd806df543_ps4324_Products_Data_Sheet.html

Regards,

jerry

New Member

Re: CAT 4500 and software package

Why you need more than one SVI on a LAN Based image?

The answer is simply, because I only need features in LAN Base and inter-VLAN routing additionally.

I know that Sup 6L-E and 6-E supports 2048 and 4096 SVI but guestion is in what software version IP Base or Enterprise?

Please, look for a picture below. Why RIP is in LAN Base software version, maybe it's possible to configure more than one SVI.

New Member

Re: CAT 4500 and software package

Some explanation:

It's possible to configure on CAT 4500 with LAN Base software about 2000 SVI interface and inter-VLAN routing too.

Kamil

Purple

Re: CAT 4500 and software package Sup 6-E

   It supports 4096 SVI's .  It shouldn't matter if its ipbase or enterprise . The main diference between the 2 is that enterprise supports all the dynamic routing protocols like eigrp, ospf, bgp ..  etcc  , where the ipbase does not . it only supports static, rip, eigrp stub...

http://www.cisco.com/en/US/partner/prod/collateral/modules/ps2797/ps9294/product_data_sheet0900aecd806df543_ps4324_Products_Data_Sheet.html

New Member

Re: CAT 4500 and software package

On 6L-E supervisor it's support only 2048 SVI's for a example on bundle WS-C4507RES6L-96V+.

760
Views
0
Helpful
5
Replies